The short answer
Wash inside out at 30–40°C, skip the fabric conditioner, don’t tumble dry on high, and never iron directly over a print or transfer. Follow that and embroidery will outlast the garment, and a good DTF or vinyl print will see out a couple of years of weekly washing.
Embroidery
Embroidery is thread stitched into the fabric, so it’s the toughest branding you can buy. Wash it with the rest of the garment. If the threads ever go fluffy, that’s normally from a hot tumble dryer; a cool dry or line dry keeps them crisp. Iron the garment inside out if it needs it.
DTF and vinyl prints
Transfers are bonded to the surface of the fabric, so heat and friction are the enemies.
- Turn the garment inside out before washing.
- Use 30°C where you can, 40°C at most.
- Avoid fabric conditioner, which softens the adhesive over time.
- Tumble dry on low or line dry.
- Never iron the print. If you must iron, do it inside out with a cloth in between.
- Don’t stack warm prints on each other straight out of the dryer.
Screen print
Screen-printed ink cures into the fabric and copes with normal washing well. The same rules apply: inside out, warm not hot, and no direct ironing.
Hi-vis
Hi-vis fades with every wash, and once the fluorescent fabric or reflective tape drops below standard the garment is no longer compliant. Wash at the temperature on the label, avoid bleach, and replace vests when they look dull. The care label normally states a maximum number of washes.
| Method | Wash temp | Tumble dry | Iron |
|---|---|---|---|
| Embroidery | As per garment | Low | Inside out |
| DTF / vinyl | 30–40°C | Low | Never on the print |
| Screen print | 30–40°C | Low | Inside out |
| Hi-vis | As per label | Low | Avoid |
Common questions
Why did a print crack?
Usually heat: a hot wash, a hot dryer or direct ironing. Occasionally it’s a cheap garment stretching more than the print can.
Can you re-brand a garment that’s faded?
Embroidery can’t be removed cleanly, but a faded print can often be covered with a fresh transfer. Ask us.
TipChoosing between methods? Read embroidery vs print or see workwear.
All guides
