The short answer
Embroidery is the go-to for a premium, hard-wearing logo on polos, fleeces, jackets and hats. DTF printing suits detailed, full-colour logos and big back prints. Vinyl is best for names, numbers and simple shapes. Screen printing comes into its own on larger runs of bold, few-colour designs, where the price per item drops.
| Method | Best for | Finish | Ideal for |
|---|---|---|---|
| Embroidery | Polos, fleeces, jackets, hats and beanies | Raised, textured and premium | Chest, sleeve and hat logos, from a single item |
| DTF print | Detailed, multi-colour and photographic logos | Smooth, flexible and vibrant | One-offs to medium runs, and big back prints |
| Vinyl | Names, initials, numbers and simple logos | Crisp, solid colour with a clean edge | Personalising individual garments |
| Screen print | Bold designs with a few solid colours | Vivid and hard-wearing | Larger runs, where the price per item drops |
Embroidery
Your logo is stitched straight into the fabric in coloured thread. The result is raised and textured, and because it’s part of the garment it won’t crack or peel. It works best on polos, fleeces, softshells, jackets, hats and beanies, and on chest, sleeve and hat-sized logos.
- Looks premium and lasts
- Great for smaller logos on the chest, sleeve or hat
- Available from a single item, with no minimum quantity
DTF printing
DTF stands for direct-to-film. Your design is printed in full colour onto film, then heat-pressed onto the garment. Because it’s printed rather than stitched, fine detail, gradients and photographic logos come out sharp.
- Smooth, flexible and vibrant
- Ideal for detailed, multi-colour artwork
- Works for one-offs and medium runs, and for big back prints
Vinyl heat-press
Names, numbers and shapes are cut from coloured vinyl, then heat-pressed onto the garment. It gives crisp, solid colour with a clean edge.
- Perfect for names, initials and numbers
- Good for simple logos in one or two colours
- Ideal for personalising individual garments
Screen printing
Ink is pushed through a fine mesh screen onto the fabric, one colour at a time. Each colour needs its own screen, so it makes most sense on larger runs, where the price per item drops.
- Vivid and hard-wearing
- Best for bold designs with a few solid colours
- Good value on bigger orders of T-shirts and hoodies
How to choose
- Look at your logo. Lots of colours, gradients or fine detail point to DTF. A simpler logo looks great embroidered.
- Think about the garment. Embroidery suits polos, fleeces, jackets and headwear. Large prints on T-shirts and hoodies suit DTF or screen print.
- Count the quantity. One-offs to medium runs suit embroidery, DTF and vinyl. Larger runs of a bold design are where screen printing makes sense.
- Mix methods if it helps. An embroidered chest logo with a printed back, or a vinyl name on an embroidered polo, works well.
TipNot sure which is right? Send us your logo and we’ll recommend the best method for your garments and budget.
Branding hi-vis
On hi-vis, we place logos so they don’t cover the reflective tape or reduce the fluorescent area the garment needs to meet its EN ISO 20471 class, and we’ll advise on the best position.
Timings and minimums
There’s no minimum quantity for branded workwear: order a single embroidered polo or kit out the whole team. There is a minimum order charge of £25. Most orders are ready within 5–7 working days of you approving your artwork. See our branded workwear page for the full range.
All guides
